Gamepad 3 Turbo Driver

Before you Start:. Make sure your account has administrative rights. If you are click happy or just want to to be careful,point to be safe. Plug the Adapter into your computer's USB port (using the black plug). Disable any antivirus software that may be running (it can interfere with the installation)The Installation Procedure:1. Download and Open the executable.2. Click next to begin the installation3.

Set your install destination (or leave it the default value) and click Next4. Name your Start menu folder (or disable it) and click Next5. Allow a desktop Icon to be created (if you want it) and click Next6. Click install to begin copying files.7a.

If you do not have your adapter plugged in you will see something like this.DO NOT CLICK REPLACE DRIVER IF THE SELECTED VALUE IS NOT WUP-028If you see something like this, plug in your adapter (or make sure it is plugged into a working USB port).7b. If you have your adapter plugged in, it should look something like this.Click Reinstall Driver (or Replace Driver)This message will appear, assuming WUP-028 is selected and the driver is WinUSB, click yes.8.

After Zadig finishes it's operation, close it (hit the X).9. VJoy's installation will automatically start, the default settings are fine, just click next.10. This will pop up asking you to accept vJoy's security certificate, Click Install to continue.11. The installer is now finished12. It is highly recommended that you restart your computer after installation.Additional Windows 8 Instructions13. Find the application install directory (defaults to C:Program Files(x86)GCNadapter), right click on the application ( GCNUSBFeeder.exe), and select Properties.14. Click the Compatibility tab, check the Run this program in compatibility mode for: box and select Windows 7.

Also check Run this program as administrator. Click OK to finish.Display Application Description. This is the Main Screen. From here you can start and stop the driver.

I don't see WUP-028 in the Zadig drop-down during installation, what could be wrong?. Check the adapter cable, and make sure the adapter is plugged in with the black USB plug (windows will play a tone when a new device is detected). If WUP-028 doesn't show up, try a different USB port, occasionally they go bad.I clicked Replace drivers in Zadig on something that wasn't WUP-028 and now XXX doesn't work!

HELP!. You can try a to an earlier point before you installed the driver. If you know what device you replaced you can try reinstalling the driver from the vendor.

Seriously try not to do this one, it can get really nasty, really fast.vJoy says it failed installation, what do I do?. Check that your antivirus software didn't block the installation.Everything installed correctly, the driver is started, but none of the inputs work! They seem to just fire off randomly every few seconds!. Make sure 'windows 8 compatibility mode' is selected in the Configuration Screen. If you are on Windows 8, make sure you are running the application inI installed the driver but it wont start! (Error 740, the requested operation requires elevation). Make sure you are running as administratorI am on an x86/32-bit version of Windows and I'm getting a 'vJoy Driver mismatch' error!.

Gamepad 3 Turbo Driver Windows 7

Try copying the files from GCNAdapterx86 to the GCNAdapter folder, overwriting the existing files.This should allow the application to run on 32-bit Windows.The controllers added for this driver are interfering with my other controllers or being detected in undesired places. Make sure the 'disable ports on exit' option is checked in the Configuration screen, save the application and close it. This should automatically disable the vJoy driver on exit. If this doesn't work for whatever reason, try manually disabling the vJoy device driver in Device Manager.